extrusion line
英 [ɪkˈstruːʒn laɪn]
美 [ɪkˈstruːʒn laɪn]
网络 挤塑生产流水线; 挤出生产线; 挤出线
双语例句
- The primary unit of extrusion line is extruder machine. Auxilaries ( downstream) include modules located after extrusion die: cooling section, hauling-off ( puller) unit, cutter, overturning table.
该挤出线的主机组成部分是挤出机，辅机（下游设备）包括挤出模具、冷却部分、牵引机，切割机及翻转台。 - Research and Development of the Tread Extrusion Line Monitor System
胎面挤出联动线监控系统的研究与开发 - Our company has absorbed advanced technology from abroad and gathered many years of manufacturing experience to produce the latest generation monofilament extrusion line.
本公司研制的最新一代单丝机，吸引国外先进技术并集合国内多年的单丝制造经验。 - Data Processing of Online Detection System for Extrusion Line of Plastic Pipes Design of Supervision Center of Wireless Data Acqusition System for Meter
塑管成型超声波在线检测系统中的数据处理仪表的无线数据采集系统监测管理模块的设计 - The research and development of polyolefin pipe extrusion production line are introduced, in which SRH series co-rotating parallel twin-screw extruder is used as the host machine.
介绍同向平行双螺杆挤出机挤出聚烯烃管材生产线的开发与研究。 - Extrusion line is a major set of equipment intended for extruding of WPC linear profile.
挤出生产线是挤出木塑型材的一组主要设备。 - Performance Detection of Control System for Continuous Extrusion Production Line Drawing and Rolling Machine
连续挤压生产线收排线机控制系统性能检测 - Single-screw Extrusion Line for Pipe Production
用于管材生产的单螺杆挤出生产线 - Now, copper continuous extrusion production line composed of these equipments and their relevant auxiliary facilities has had a very high automaticity.
现在，由这些设备和相应的辅助设施组成的铜连续挤压生产线已有了很高的自动化程度。 - It established the relation between apex angle and tucking angle of gusset of extrusion line for blown-film through geometrical deduction.
通过几何推导，确立了吹膜机组插板顶角与插板插入角之间的关系。 - The extrusion line for film and plate of chemically foamed PP, the production equipment for heat moulding plate of physically foamed PP and the application of foamed PP were presented.
介绍了化学发泡PP薄膜、板材的挤出发泡成型设备及物理发泡PP热成型板材的生产装置，另外还概述了发泡PP的应用。 - Structural characteristics and working mechanism of a rubber sheet continuously vulcanizing and extrusion line
橡胶卷材挤出连续硫化生产线的结构特色与工作原理 - The hardware and software design of the cutting control system for tire tread extrusion line is introduced.
介绍了轮胎胎面挤出联动机组切割控制系统的硬件组成及软件设计。 - Design and Discussion of Gusset of Large-size Extrusion Line for Blown-film
大型吹膜机组插板的设计与探讨 - Modification on EPE Sheet Extrusion Line to Increase Productive Output Rate and Sheet Width
提高EPE片材机组产品幅宽和产量的措施 - The structure, characteristics and working mechanism of waterproof and preservative rubber sheet continuously vulcanizing and extrusion line is introduced.
介绍了橡胶防水防腐卷材挤出连续硫化生产线的结构、特点和工作原理； - The control system of those march-past meters is always applied into the plastics extrusion line for automatically supervising and controlling.
塑料挤出生产线通常采用分立仪表控制系统来实现生产线的自动监控。 - In order to increase the control level for tread extrusion line, CC-Link site bus technique is adopted.
为了提高胎面挤出联动线的控制水平，采用了CC-Link现场总线技术。 - Design of cutting control system for tire tread extrusion line
轮胎胎面挤出联动机组切割控制系统的设计 - The Research Design of the Control System of the Wire Cable Extrusion Line Based on Field Bus
基于现场总线技术的线缆生产设备控制系统研究与设计 - Design of Extrusion Line for Heavy-Duty Packaging Blown Film
吹重包装膜机组的设计 - Inner Liner Extrusion Line
中田工程公司内衬层挤出生产线 - The new progress about twin& screw extruders and control technology in reaction extrusion line are described.
介绍双螺杆挤出机的最新进展以及反应性挤出生产线控制技术开发动向； - It prepared matrix by means of melt blending method, and then blended the matrix with matrix resin ( Polyethylene) according to certain proportion, then prepared film by using extrusion line for blown-film.
采用熔融共混法制备母料，然后将母料与基体树脂（聚乙烯）按一定比例混合，于吹塑机上吹塑成膜。 - Development of GOT Display and Control System for Continuous Copper Strips Extrusion Line
铜扁线连续挤压生产线GOT监测控制系统 - A new type discard separator on copper extrusion line
新型在线铜挤压自动压余分离装置 - New Rubber Sheet Extrusion Line
新型橡胶片材挤出生产线 - Third, the paper flying saw continuous extrusion production line synchronization buffer is analyzed.
第三，论文对连续挤压生产线飞锯机的同步缓冲进行了分析。 - The program is simple to meet the needs of continuous extrusion production line.
该方案结构简单，并能满足连续挤压生产线的需求。